Air Release Valve Above Ground Enclosure
Placer Waterworks offers a 100% fully accessible working space; one person cans easily open and close the Air Valve Relief Enclosure. Models come available in both Insulated or Non-insulated options.
For insulated models, ventilation numbers absolute minimum based on enclosure being insulated.
Preferred product of the Metropolitan Water District of Southern California.
Placer Waterworks Above Ground ARV Enclosures Offer:
- No exterior hinges or anchor fasteners.
- Recessed single lock security.
- Full access service ability.
- Four corner 3/8″x5″x2-1/2″ anchor plates provide a continuous air gap at the base frame.
- Every 3 lineal inches of base frame equals 1″ square inch of ventilation.
- Top surfaces crowned for drainage.
- Base Frame made from 2″x 2″ angle, smaller enclosures 3/16″ thick, larger models 1/4″ thick.
- Insulted models have 1″ styrofoam boned to the body. The door insulation is bonded to 22 gauge galvanized sheet metal.
- Optional protective coating:
- Two part epoxy primer & aliphatic urethane paint
- 2-3 mils thick Powder Coating
Description: Cross broken 14 Gauge enclosure with 10 gauge top, powder coated and etc…
Option’s: Galvanized 22 Gauge panel with 1″ styrofoam.
DIMS or Models: View PDF for different sizes and models.
Catalog # | Description | |
---|---|---|
PW/ SJARV-MR | Above ground air release valve enclosure. Powder coated. | Download PDF |
PW/ SJARV | Cross broken 14 GA. enclosure with single recessed lock. (PWW STD) | Download PDF |
PW/ SJARV-W | Insulated above ground air release enclosure. | Download PDF |
PW/ SJARV-S | Above ground sewage air release valve enclosure. | Download PDF |
PW/ SJARV-M | Metropolitan Water Department of South California standard. | Download PDF |
PW/ SJARV- EMBED | SJARV Enclosures STD Embed | Download PDF |